Buck Rogers K4ABT Manual del operador descargar pdf (Pagina 53)

The Packet Radio “2 N 1” Handbook by Buck Rogers K4ABT

Section 1; Packet Radio “The Basics” Section 2; The X1J4 System Node Operator’s (SNO) Handbook

ILLUSTRATION SECTION Charts & Node Drawings TheNET X1J4 System Node Operators Handbook __ Page 53

This modification is for the older, pre 1990, (no suffix), MJF-1270. Most MFJ-1270”B” versions and all “C” versions are

already configured with this feature. To perform this modification, connect one end of a wire to pin 23 of the RS232

connector. Connect the other end of the wire to pins 1-2-3 of JMP9 (these three pins are already connected together on the

circuit board). This modification allows the TheNET X1 firmware to be configured for multi-frequency operation by

jumpering RS232 pins 10 and 23 together in the TNC-to-TNC cable.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 66 67

Sin comentarios

Buck Rogers K4ABT Manual del operador Pagina 53